Install Mikrotik OS Siapkan PC, minimal Pentium I juga gak papa RAM 64,HD 500M atau pake flash memory 64 Di server / PC kudu ada minimal 2 ethernet, 1 ke arah luar dan 1 lagi ke Network local Burn Source CD Mikrotik OS masukan ke CDROM Boot dari CDROM Ikuti petunjuk yang ada, gunakan syndrom next-next dan default Install paket2 utama, lebih baiknya semua packet dengan cara menandainya (mark) Setelah semua paket ditandai maka untuk menginstallnya tekan "I" Lama Install normalnya ga sampe 15menit, kalo lebih berarti gagal, ulangi ke step awal Setelah diinstall beres, PC restart akan muncul tampilan login
Ini aku kasih link untuk download Mikrotik RouterOS
http://rginspiration.com/kutching/downloads/mikrotik-2.9.27.rar
Ukuran filenya : 14.4 MB
Kemudian di extrack dan kemudian burn ke CD itu file ISO nya.
1. Install Mikrotik OS Siapkan PC, minimal Pentium I juga gak papa RAM 64,HD 500M atau pake flash memory 64 Di server / PC kudu ada minimal 2 ethernet, 1 ke arah luar dan 1 lagi ke Network local Burn Source CD Mikrotik OS masukan ke CDROM Boot dari CDROM Ikuti petunjuk yang ada, gunakan syndrom next-next dan default Install paket2 utama, lebih baiknya semua packet dengan cara menandainya (mark) Setelah semua paket ditandai maka untuk menginstallnya tekan "I" Lama Install normalnya ga sampe 15menit, kalo lebih berarti gagal, ulangi ke step awal Setelah diinstall beres, PC restart akan muncul tampilan login
2. Setting dasar mikrotik
Langkah awal dari semua langkah konfigurasi mikrotik adalah setting ip
Hal ini bertujuan agar mikrotik bisa di remote dan dengan winbox dan memudahkan kita untuk
melakukan berbagai macam konfigurasi Login sebaga admin degan default password ga usah diisi langsung enter
Gantilah dengan ip address anda dan interface yg akan digunakan untuk meremote sementara
Di sini akan saya terangkan dengan menggunakan 2 cara yaitu dengan dengan text dan winbox.
I. Langkah setting Mikrotik TEXT
------------------------------------------------
Mari kita mulai dengan asumsi proses install sudah berhasil
1. Install - OK
2. Setting IP eth1 222.124.xxx.xxx (dari ISP)
perintah :
ip address add address 222.124.xxx.xxx netmask 255.255.255.xxx interface ether1
IP tersebut adalah IP public / IP yang yang ada koneksi Internet
3. Setting IP eth2 192.168.1.254
perintah :
ip address add address 192.168.1.254 netmask 255.255.255.0 interface ether2
IP tersebut adalah IP Local anda.
Sekarang lakukan ping ke dan dari komputer lain, setelah konek lanjutkan ke langkah
berikutnya, kalo belum ulangi dari langkah no 2.
4. Setting Gateway
perintah :
ip route add gateway=222.124.xxx.xxx (dari ISP)
5. Setting Primary DNS
perintah :
ip dns set primary-dns=203.130.208.18 (dari ISP)
6. Setting Secondary DNS
perintah :
ip dns set secondary-dns=202.134.0.155 (dari ISP)
7. Setting Routing masquerade ke eth1
perintah :
ip firewall nat add chain=srcnat action=masquerade out-interface=ether1
Untuk terakhir lakukan test ping ke Gateway / ke yahoo.com, bila konek maka Mikrotik anda dah siap
di gunakan
II. Langkah setting Mikrotik Via WinBox
----------------------------------------------------------
1. Setelah install Mikrotik sudah OK, selanjutnya masukkan IP sembarang untuk remote.
Misal
ip address add address 192.168.1.254 netmask 255.255.255.0 interface ether2
Kemudian buka browser dengan alamat IP tadi, dan download Winbox
2. Buka Winbox yang telah di download tadi
3. Di tampilan Winbox, pada kolom Connect To masukkan no IP tadi (192.168.1.254) dengan
Login : admin password : kosong. Kemudian klik tombol Connect
4. Login ke Mikrotik Via Winbox berhasil
5. Klik IP ---> ADDRESS
6. Ini adalah tampilan dari address
7. Kemudian masukkan IP public (dari ISP)
8. Ini daftar IP pada 2 ethernet
9. Setting Gateway, IP ---> Routes
10. Masukkan IP GATEWAY (dari ISP)
11. Hasil ROUTING
12. Masukkan Primary DNS dan Secondary DNS (dari ISP)
Kemudian klik Apply dan OK
13. Setting MASQUERADE
14. Klik IP ---> Firewall
15. Kemudian pilih NAT
16. Pada tab General
pada Chain pilih srcnat
pada Out. Interface pilih ether1
pada tab Action pilih masquerade
Kemudian klik Apply dan OK
Senin, 30 Maret 2009
User Manual Menggunakan Modem CDMA
1. GETTING STARTED
1.1 Getting Started：
Before you use our products, you must first:
1. Have a properly configured SIM/UIM (Provided by the Service Provider) - facilitates permission to use network.
2. Install the products software, located on the installation CD.
3. Insert SIM/UIM card into the products SIM/UIM card slot.
4. Insert products into the PC card slot on your PC for Microsoft Windows to detect and configure.
5. Launch products, create a profile if necessary and select the Connect button.
1. GETTING STARTED
1.1 Getting Started：
Before you use our products, you must first:
1. Have a properly configured SIM/UIM (Provided by the Service Provider) - facilitates permission to use network.
2. Install the products software, located on the installation CD.
3. Insert SIM/UIM card into the products SIM/UIM card slot.
4. Insert products into the PC card slot on your PC for Microsoft Windows to detect and configure.
5. Launch products, create a profile if necessary and select the Connect button.
1.2 System Requirements:
１.２.１ 133 MHz or faster Pentium- compatible
１.２.２ Windows 2000 or Windows XP
１.２.３ At least 64 MB RAM
１.２.４ 50 MB available hard drive space
１.２.５ CD-ROM drive
１.２.６ Type II, PC CARD slot --- 3.3V
2. Driver and Hardware Installation
２.１ Insert the CD that contains the products installation software into the CD-ROM drive of your computer, the installation procedures will start automatically. If the auto-run program does not start, go to the drive path, find setup.exe and double-click file on the CD.
２.２ The "AMS Electronics(Shenzhen) Company Limited welcome you" window will appear. Click next. See Figure 1.
Figure 1
２.３In installation path dialog box (Figure 2), select the installation path, then click next,
Figure 2
２.４The “additional icon” window(Figure 3) will appear. Read the information, choose and click next.
Figure 3
２.5 The "Setup Status" window will appear while products is being installed. See Figure 4.
Figure 4
２.6 Following, the "insert card" window(Figure 5) will appear. Insert the SIM/UIM card into the modem, and then insert the modem into the PC card slot of your PC.
Figure 5
２.７When the installation is complete, the "Completing setup wizard" window(Figure 6) will appear.
Figure 6
.２.8 Click Finish.
Note: SIM/UIM card contact points must face downwards, and the orientation notch must be positioned as shown in the picture.
Install successfully
3. Introduction Manager Interface
3.1 Entering products Manager interface
Double click icon on the desktop to start the products Manager. If the system prompts you to input a PIN, please input a correct one. PIN code just can be inputted 3 times. Over three times, the SIM/UIM card will be locked.
3.2 Shortcut Icons Description
: Connecting or disconnecting the internet.
: Accessing the Call service.
: Accessing the SMS.
: Accessing the Contacts service.
3.3 Internet Service
3.3.1 Network Connection Settings
Creating a New Profile:
1) Click Connection Settings on the menu bar.
2) Click
3) Enter a new profile name and other parameters.
4) Click to save the new profile.
Note: Please consult the network operator for all the information to be inputted.
3.3.2 Accessing the Internet
1) Click to connect the network.
2) When the connection is completed, corresponding information about the connected network will be displayed on the right side of the window, which includes:
* the duration of the current connection;
* The data flow volume of the current connection;
* the volume, rate and the top rate of the current sending and received data.
3) Click to disconnect the network.
3.4 Call Service
Insert an earphone into the earphone jack of the products before a call service.
3.4.1 Making a Call by Directly Entering a
Telephone Number
1) Click to open the Call Service window.
2) You may enter a telephone number by clicking telephone keypad on the Call Service window.
3) Click to make a call.
4) Click to hang up.
Note: You may click to cancel the input number digit by digit or to cancel the whole input number by clicking and holding it for a moment. Alternatively, you may also do it by pressing the Backspace key of the computer keyboard.
3.4.2 Making a Call by Choosing a Telephone
Number from the Contacts List
1) Click to go to the Call Service window.
2) Click to open the Contacts list. Double click a contact or select a contact and then click:
If the contact you have selected has only one number, this number will appear on the window and be dialed out directly.
If the contact has two or more numbers, double click the intended number from the pop-up Select Phone Number window or click after selecting the number; and the selected number will appear on the window and be dialed out directly.
3) Click to hang up.
3.4.3 Answering a call
Products may prompt you an incoming call by sound or vision. You may select [Settings/Options] to set the prompt mode for incoming calls.
You will hear a sound on an incoming call by earphone if you have enabled “Equipment alert tone”.
1) Click to enter the Call Service window.
2) Click to make a call.
3) Click to hang up.
* You will see a pop-up window on an incoming call if you have enabled "Alert window"
1) Click to answer a call.
2) Click to reject a call.
3.4.4 Volume Control
Click to open the Call Service window. You may adjust the voice volume by moving.
3.5 SMS
3.5.1 Writing a New Message
1) Click to open the SMS window.
2) Click to open a New window.
3) Enter a telephone number and message contents.
4) Click to send the message.
Note: You may also click to search for a telephone number in the Contacts book.
3.5.2 Viewing a Message
An incoming message can be prompted by sound or vision as is preset on the menu bar [Settings/Options].
You will hear sound prompt on a new incoming message if you have enabled "Alert tone".
1) Click to enter the SMS window.
2) Click to enter the inbox to view received messages.
You will see a pop-up window on a new incoming message if you have enabled "Alert window".
Click on the pop-up window to enter the Inbox to read messages, or click to leave messages unread.
3.6 Contacts Service
3.6.1 Creating an Item in the Contacts
1) Click to enter the Contacts window.
2) Click.
3) Enter such information as Name, telephone numbers, E-Mail and other information.
4) Click to save the information.
3.6.2 Modifying Items in the Contacts
1) Click to enter the Contacts window.
2) Highlight the information to be modified and double click it or click.
3) Click to save the modified information.
3.6.3 Deleting Items from the Contacts
1) Click to open the Contacts window.
2) Select one or more items you want to remove from the contacts, and then click.
3) Click to confirm the deletion.
3.6.4 Sending a Message
1) Click to open the Contacts window.
2) Select one or more items from the Contacts, and then click; the program will jump to the window for creating a new message.
3) The mobile numbers retrieved appear in the blank column behind the "Contacts". Input the content
for the message and click.
3.6.5. Making a Call
1) Click to open the Contacts window.
2) Select the item that contains the number you want to dial from the Contacts, and then click.
If the item you have selected contains only one telephone number, the Call Service window will be displayed automatically.
If two or more telephone numbers are contained in
the item you have selected, the Select Phone Number window will be displayed and you will be prompted to select one number. After doing that, click and the Call Service window will be displayed.
3) The phone number you have selected will be displayed automatically in the Call Service window; and the number will be dialed out automatically.
3.6.6. Searching for Items in the Contacts
1) Click.
2) In the Find window:
Select a field item from the pull-down list in the "Condition" area. Enter relevant searching terms in the "Value" text box.
Select "Match Whole Word Only" and/or "Match Case".
3) Click or to begin searching.
1.1 Getting Started：
Before you use our products, you must first:
1. Have a properly configured SIM/UIM (Provided by the Service Provider) - facilitates permission to use network.
2. Install the products software, located on the installation CD.
3. Insert SIM/UIM card into the products SIM/UIM card slot.
4. Insert products into the PC card slot on your PC for Microsoft Windows to detect and configure.
5. Launch products, create a profile if necessary and select the Connect button.
1. GETTING STARTED
1.1 Getting Started：
Before you use our products, you must first:
1. Have a properly configured SIM/UIM (Provided by the Service Provider) - facilitates permission to use network.
2. Install the products software, located on the installation CD.
3. Insert SIM/UIM card into the products SIM/UIM card slot.
4. Insert products into the PC card slot on your PC for Microsoft Windows to detect and configure.
5. Launch products, create a profile if necessary and select the Connect button.
1.2 System Requirements:
１.２.１ 133 MHz or faster Pentium- compatible
１.２.２ Windows 2000 or Windows XP
１.２.３ At least 64 MB RAM
１.２.４ 50 MB available hard drive space
１.２.５ CD-ROM drive
１.２.６ Type II, PC CARD slot --- 3.3V
2. Driver and Hardware Installation
２.１ Insert the CD that contains the products installation software into the CD-ROM drive of your computer, the installation procedures will start automatically. If the auto-run program does not start, go to the drive path, find setup.exe and double-click file on the CD.
２.２ The "AMS Electronics(Shenzhen) Company Limited welcome you" window will appear. Click next. See Figure 1.
Figure 1
２.３In installation path dialog box (Figure 2), select the installation path, then click next,
Figure 2
２.４The “additional icon” window(Figure 3) will appear. Read the information, choose and click next.
Figure 3
２.5 The "Setup Status" window will appear while products is being installed. See Figure 4.
Figure 4
２.6 Following, the "insert card" window(Figure 5) will appear. Insert the SIM/UIM card into the modem, and then insert the modem into the PC card slot of your PC.
Figure 5
２.７When the installation is complete, the "Completing setup wizard" window(Figure 6) will appear.
Figure 6
.２.8 Click Finish.
Note: SIM/UIM card contact points must face downwards, and the orientation notch must be positioned as shown in the picture.
Install successfully
3. Introduction Manager Interface
3.1 Entering products Manager interface
Double click icon on the desktop to start the products Manager. If the system prompts you to input a PIN, please input a correct one. PIN code just can be inputted 3 times. Over three times, the SIM/UIM card will be locked.
3.2 Shortcut Icons Description
: Connecting or disconnecting the internet.
: Accessing the Call service.
: Accessing the SMS.
: Accessing the Contacts service.
3.3 Internet Service
3.3.1 Network Connection Settings
Creating a New Profile:
1) Click Connection Settings on the menu bar.
2) Click
3) Enter a new profile name and other parameters.
4) Click
Note: Please consult the network operator for all the information to be inputted.
3.3.2 Accessing the Internet
1) Click to connect the network.
2) When the connection is completed, corresponding information about the connected network will be displayed on the right side of the window, which includes:
* the duration of the current connection;
* The data flow volume of the current connection;
* the volume, rate and the top rate of the current sending and received data.
3) Click to disconnect the network.
3.4 Call Service
Insert an earphone into the earphone jack of the products before a call service.
3.4.1 Making a Call by Directly Entering a
Telephone Number
1) Click to open the Call Service window.
2) You may enter a telephone number by clicking telephone keypad on the Call Service window.
3) Click to make a call.
4) Click to hang up.
Note: You may click to cancel the input number digit by digit or to cancel the whole input number by clicking and holding it for a moment. Alternatively, you may also do it by pressing the Backspace key of the computer keyboard.
3.4.2 Making a Call by Choosing a Telephone
Number from the Contacts List
1) Click to go to the Call Service window.
2) Click to open the Contacts list. Double click a contact or select a contact and then click
If the contact you have selected has only one number, this number will appear on the window and be dialed out directly.
If the contact has two or more numbers, double click the intended number from the pop-up Select Phone Number window or click
3) Click to hang up.
3.4.3 Answering a call
Products may prompt you an incoming call by sound or vision. You may select [Settings/Options] to set the prompt mode for incoming calls.
You will hear a sound on an incoming call by earphone if you have enabled “Equipment alert tone”.
1) Click to enter the Call Service window.
2) Click to make a call.
3) Click to hang up.
* You will see a pop-up window on an incoming call if you have enabled "Alert window"
1) Click
2) Click
3.4.4 Volume Control
Click to open the Call Service window. You may adjust the voice volume by moving.
3.5 SMS
3.5.1 Writing a New Message
1) Click to open the SMS window.
2) Click
3) Enter a telephone number and message contents.
4) Click
Note: You may also click
3.5.2 Viewing a Message
An incoming message can be prompted by sound or vision as is preset on the menu bar [Settings/Options].
You will hear sound prompt on a new incoming message if you have enabled "Alert tone".
1) Click to enter the SMS window.
2) Click
You will see a pop-up window on a new incoming message if you have enabled "Alert window".
Click
3.6 Contacts Service
3.6.1 Creating an Item in the Contacts
1) Click to enter the Contacts window.
2) Click
3) Enter such information as Name, telephone numbers, E-Mail and other information.
4) Click
3.6.2 Modifying Items in the Contacts
1) Click to enter the Contacts window.
2) Highlight the information to be modified and double click it or click
3) Click
3.6.3 Deleting Items from the Contacts
1) Click to open the Contacts window.
2) Select one or more items you want to remove from the contacts, and then click
3) Click
3.6.4 Sending a Message
1) Click to open the Contacts window.
2) Select one or more items from the Contacts, and then click
3) The mobile numbers retrieved appear in the blank column behind the "Contacts". Input the content
for the message and click
3.6.5. Making a Call
1) Click to open the Contacts window.
2) Select the item that contains the number you want to dial from the Contacts, and then click
If the item you have selected contains only one telephone number, the Call Service window will be displayed automatically.
If two or more telephone numbers are contained in
the item you have selected, the Select Phone Number window will be displayed and you will be prompted to select one number. After doing that, click
3) The phone number you have selected will be displayed automatically in the Call Service window; and the number will be dialed out automatically.
3.6.6. Searching for Items in the Contacts
1) Click
2) In the Find window:
Select a field item from the pull-down list in the "Condition" area. Enter relevant searching terms in the "Value" text box.
Select "Match Whole Word Only" and/or "Match Case".
3) Click
Langganan:
Postingan (Atom)